The MAX17409 is a 1-phase Quick-PWM™ step-down VID power-supply controller for high-performance graphics processors. The Quick-PWM control provides instantaneous response to fast-load current steps. Active voltage positioning reduces power dissipation and bulk output capacitance requirements and allows ideal positioning compensation for tantalum, polymer, or ceramic bulk output capacitors.
The MAX17409 is intended for two different notebook processor core applications: either bucking down the battery directly to create the core voltage, or bucking down the +5V system supply. The single-stage conversion method allows this device to directly step down high-voltage batteries for the highest possible efficiency. Alternatively, 2-stage conversion (stepping down the +5V system supply instead of the battery) at higher switching frequency provides the minimum possible physical size.
A slew-rate controller allows controlled transitions between VID codes. A thermistor-based temperature sensor provides programmable thermal protection. The MAX17409 is available in a 28-pin, 4mm x 4mm TQFN package.
Key Features
Applications/Uses
1-Phase Quick-PWM Controller
±6mV VOUT Accuracy Over Line, Load, and Temperature
6-Bit Graphics DAC (12.5mV LSB)
Active Voltage Positioning with Adjustable Gain
Accurate Droop and Current Limit
Remote Output and Ground Sense
Buffered 2V Reference Output for Offsets
Power-Good Window Comparator
Temperature Comparator
Drives Large Synchronous Rectifier FETs
2V to 26V Power Input Range
Adjustable Switching Frequency (600kHz max)
Output Overvoltage and Undervoltage Protection
Soft-Startup and Soft-Shutdown
Internal Boost Diodes
2- to 4-Li+ Cells Battery to Processor Core Supply Converters
Download
E-Mail